Lonecoyote
Well-known member
- Joined
- Oct 15, 2016
- Messages
- 5,803
- Reaction score
- 2
Seems not many members are interested in custom made knives so this will be the last knife I post.
The blade was made from a 1095/15n20 Damascus billet. The handle scales are Desert Ironwood, which is more difficult to work with than most wood. Had to wear a special cartridge mask and full goggles while sanding. The handles are epoxied and I used 3 mosaic pins, 2 is difficult enough to line up properly, but 3 looks nicer even though it was time consuming. There is 8 coats of Tung oil and hand buffed after 14 days of curing. The blade is sharp enough to shave with and does look better in hand.
KEEP ON PUFFING!!!
The blade was made from a 1095/15n20 Damascus billet. The handle scales are Desert Ironwood, which is more difficult to work with than most wood. Had to wear a special cartridge mask and full goggles while sanding. The handles are epoxied and I used 3 mosaic pins, 2 is difficult enough to line up properly, but 3 looks nicer even though it was time consuming. There is 8 coats of Tung oil and hand buffed after 14 days of curing. The blade is sharp enough to shave with and does look better in hand.
KEEP ON PUFFING!!!