Yep, another check your tins thread. My two 2oz tins of Bufflehead's arrived in todays mail. A tin of Virginia Ruddy Decoy from 2003 and a tin of Redheaded Decoy from 2004. Packaged perfectly of course. I had dealt with this person before and he's first rate.
I would not expect most people to examine a tin as well as I do. So I would not be surprised at all getting a tin with a flaw in it. I didn't take a pic, but let me describe what I found.
You know these little 2 oz narrow tins. With the pop tops. They have been used by several manufacturers. Well, I have found tiny little rust pits in the bottom and along the side seam in these before. So I examined these two tins for any sign of that. Found none. No pits, or blistering of metal and no stains in the paper label. Good looking tins. Took the lid off. Under that was a round paper disk with the Bufflehead address etc. Looked at the top and missed it at first. But then noticed what looked like a small brown mark along one of the stamped indentations where the pop top would break when bent up. I scraped at it with a toothpick. It seemed to smear.
Odd I thought. I poked it with the toothpick and it went right though with no effort. Dang. A hole says I. So I open the tin. This is a chunky sort of cut tobacco and it was perfectly moist. But in several places a chunk was stuck to the tin and at that point was a tiny bit of rust and what appeared to be a wet piece of tobacco. Along that indentation was a piece stuck to the lid. The brown color was from the piece of tobacco staining the groove. This tin was on it's way to ruination if I hadn't noticed it.
I am blaming no one. I am pointing no fingers. This is not something most people would ever have noticed. It's probably a statistic of the manufacturing process. A certain number will not get perfectly coated inside. A certain number may get too much stress on the grooved pop top and have a minuscule crack. My point is, no matter where you get your tinned tobacco, check the tins. Have jars at the ready.
This Redheaded Decoy is a mighty fine smoke people. It's on the moist side, but lights and burns rather well. 8)
I would not expect most people to examine a tin as well as I do. So I would not be surprised at all getting a tin with a flaw in it. I didn't take a pic, but let me describe what I found.
You know these little 2 oz narrow tins. With the pop tops. They have been used by several manufacturers. Well, I have found tiny little rust pits in the bottom and along the side seam in these before. So I examined these two tins for any sign of that. Found none. No pits, or blistering of metal and no stains in the paper label. Good looking tins. Took the lid off. Under that was a round paper disk with the Bufflehead address etc. Looked at the top and missed it at first. But then noticed what looked like a small brown mark along one of the stamped indentations where the pop top would break when bent up. I scraped at it with a toothpick. It seemed to smear.
Odd I thought. I poked it with the toothpick and it went right though with no effort. Dang. A hole says I. So I open the tin. This is a chunky sort of cut tobacco and it was perfectly moist. But in several places a chunk was stuck to the tin and at that point was a tiny bit of rust and what appeared to be a wet piece of tobacco. Along that indentation was a piece stuck to the lid. The brown color was from the piece of tobacco staining the groove. This tin was on it's way to ruination if I hadn't noticed it.
I am blaming no one. I am pointing no fingers. This is not something most people would ever have noticed. It's probably a statistic of the manufacturing process. A certain number will not get perfectly coated inside. A certain number may get too much stress on the grooved pop top and have a minuscule crack. My point is, no matter where you get your tinned tobacco, check the tins. Have jars at the ready.
This Redheaded Decoy is a mighty fine smoke people. It's on the moist side, but lights and burns rather well. 8)
![[3-Size Set] Copper Pipe Cleaner for Drill, Clean 1/2, 3/4, 1-in Copper Pipes & Tubes for Soldering, 3 Tube Cleaning Brushes, Model InerLok050, 075, 100, w/ Stainless-Steel Wire Bristles & 1/4” Shank](https://m.media-amazon.com/images/I/41QVxunlqML._SL500_.jpg)
